H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 511)

48-4
Follow these steps to perform configuration on prompt mode of file system:
To do… Use the command… Remarks
Enter system view system-view —
Configure the prompt mode of the
file system
file prompt { alert | quiet }
Required
By default, the prompt mode of the
file system is alert.
File System Configuration Example
# Display all the files in the root directory of the file system.
<device> dir /all
Directory of unit1>flash:/
1 -rw- 1443 Apr 02 2000 02:45:13 startup.cfg
2 -rwh 151 Apr 02 2000 00:05:53 private-data.txt
3 (*) -rw- 1713 Apr 01 2000 23:57:11 vrpcfg.cfg
4 -rwh 356 Apr 02 2000 03:20:25 dsakey
5 -rwh 428 Apr 02 2000 03:21:59 hostkey
6 -rwh 572 Apr 02 2000 03:22:21 serverkey
6858 KB total (6848 KB free)
(*) -with main attribute (b) -with backup attribute
(*b) -with both main and backup attribute
# Copy the file flash:/startup.cfg to flash:/test/, with 1.cfg as the name of the new file.
<device> copy flash:/startup.cfg flash:/test/1.cfg
Copy unit1>flash:/startup.cfg to unit1>flash:/test/1.cfg?[Y/N]:y
..
%Copy file unit1>flash:/startup.cfg to unit1>flash:/test/1.cfg...Done.
# Display the file information after the copy operation.
<device>dir /all
Directory of unit1>flash:/
1 -rw- 1443 Apr 02 2000 02:45:13 startup.cfg
2 -rwh 151 Apr 02 2000 00:05:53 private-data.txt
3 (*) -rw- 1713 Apr 01 2000 23:57:11 vrpcfg.cfg
4 -rwh 356 Apr 02 2000 03:20:25 dsakey
5 -rwh 428 Apr 02 2000 03:21:59 hostkey
6 -rwh 572 Apr 02 2000 03:22:21 serverkey
7 drw- - Apr 02 2000 00:15:8 test
6858 KB total (6848 KB free)
(*) -with main attribute (b) -with backup attribute
(*b) -with both main and backup attribute
<device> dir unit1>flash:/test/
Directory of unit1>flash:/test/