H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 488)

46-16
In the Host Name (or IP address) text box, enter the IP address of the server. Note that there must be
a route available between the IP address of the server and the client.
Select a protocol for remote connection
As shown in Figure 47-7 , select SSH under Protocol.
Select an SSH version
From the category on the left pane of the window, select SSH under Connection. The window as
shown in
Figure 47-8 appears.
Figure 47-8 SSH client configuration interface 2
Under Protocol options, select 2 from Preferred SSH protocol version.
Some SSH client software, for example, Tectia client software, supports the DES algorithm only when
the ssh1 version is selected. The PuTTY client software supports DES algorithm negotiation ssh2.
Open an SSH connection with publickey authentication
If a user needs to be authenticated with a public key, the corresponding private key file must be
specified. A private key file is not required for password-only authentication.
From the category on the left of the window, select Connection/SSH/Auth. The following window
appears.