Displaying and maintaining device configuration, Displaying and maintaining device configuration -5 – H3C Technologies H3C WX3000 Series Unified Switches User Manual
Page 73
9-5
The configuration file must use “.cfg” as its extension name and the startup configuration file must be
saved at the root directory of the device.
Displaying and Maintaining Device Configuration
To do…
Use the command…
Remarks
Display the initial configuration
file saved in the storage device
display saved
-configuration [ unit unit-id ]
[ by-linenum ]
Display the configuration file
used for this and next startup
display startup
[ unit unit-id ]
Display the current VLAN
configuration of the device
display current-configuration vlan
[ vlan-id ]
[ by-linenum ]
Display the validated
configuration in current view
display
this [ by-linenum ]
Display current configuration
display current-configuration
[ configuration
[ configuration-type ] | interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ | { begin |
include
| exclude } regular-expression ]
Available in any
view