H3C Technologies H3C WX3000 Series Unified Switches User Manual
Page 667
67-6
[SwitchA-rip] network 3.0.0.0
2) Configure Switch B.
# Create VLANs and configure IP addresses for the VLAN interfaces. The configuration procedure is
omitted.
# Configure RIP.
<SwitchB> system-view
[SwitchB] rip
[SwitchB-rip] network 1.0.0.0
[SwitchB-rip] network 3.0.0.0
[SwitchB-rip] network 6.0.0.0
3) Configure Switch C.
# Create VLANs and configure IP addresses for the VLAN interfaces. The configuration procedure is
omitted.
# Define IP-prefix 1 containing the IP address prefix 1.0.0.0/8, and IP-prefix 2 containing the IP address
prefix 3.0.0.0/8.
<SwitchC> system-view
[SwitchC] acl number 2000
[SwitchC-acl-basic-2000] rule permit source 1.0.0.0 0.255.255.255
[SwitchC-acl-basic-2000] quit
[SwitchC] acl number 2001
[SwitchC-acl-basic-2000] rule permit source 3.0.0.0 0.255.255.255
[SwitchC-acl-basic-2000] quit
# Create a route policy named in and node 10 with the matching mode being permit. Define if-match
clauses. Apply the cost 5 to routes matching the outgoing interface VLAN-interface 2 and ACL 2000.
[SwitchC] route-policy in permit node 10
[SwitchC-route-policy] if-match interface Vlan-interface2
[SwitchC-route-policy] if-match acl 2000
[SwitchC-route-policy] apply cost 5
[SwitchC-route-policy] quit
# Create node 20 with the matching mode being permit in the route policy. Define if-match clauses.
Apply the cost 6 to routes matching the outgoing interface VLAN-interface 2 and ACL 2001.
[SwitchC] route-policy in permit node 20
[SwitchC-route-policy] if-match interface Vlan-interface2
[SwitchC-route-policy] if-match acl 2001
[SwitchC-route-policy] apply cost 6
[SwitchC-route-policy] quit
# Create node 30 with the matching mode being permit in the route policy. Define if-match clauses.
Apply the cost 6 to routes matching the outgoing interface VLAN-interface 6 and ACL 2000.
[SwitchC] route-policy in permit node 30
[SwitchC-route-policy] if-match interface Vlan-interface6
[SwitchC-route-policy] if-match acl 2000
[SwitchC-route-policy] apply cost 6
[SwitchC-route-policy] quit
# Create node 40 with the matching mode being permit in the route policy. Define if-match clauses.
Apply the cost 5 to routes matching the outgoing interface VLAN-interface 6 and ACL 2001.
[SwitchC] route-policy in permit node 40
[SwitchC-route-policy] if-match interface Vlan-interface6
[SwitchC-route-policy] if-match acl 2001