H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 592)

58-13
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client function hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group and
enter its view hwping administrator-name
operation- tag
Required
By default, no test group is
configured.
Configure the destination address destination-ip ip-address
Required
This IP address and the one
configured on the HWPing server
for listening service must be the
same.
By default, no destination address
is configured.
Configure the destination port
destination-port
port-number
z
Required in a Udpprivate test
z
A Udppublic test is a UDP
connection test on port 7. Use
the hwping-server udpecho
ip-address 7 command on the
server to configure the listening
service port; otherwise the test
will fail. No port number needs
to be configured on the client;
any destination port number
configured on the client will not
take effect.
z By default, no destination port
number is configured.
Configure the source IP address source-ip ip-address
Optional
By default, no source IP address is
configured.
Configure the source port source-port port-number
Optional
By default, no source port is
specified.
Configure the test type
test-type { udpprivate |
udppublic }
Required
By default, the test type is ICMP.
Configure the number of probes
per test
count times
Optional
By default, one probe is made per
test.
Configure the maximum number of
history records that can be saved
history-records number
Optional
By default, the maximum number is
50.
Configure the data packet size datasize size
Optional
By default, the data packet size is
100 bytes.
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds, indicating
no automatic test will be made.
Configure the probe timeout time timeout time
Optional
By default, a probe times out in
three seconds.