H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 57)

1-3
Figure 5-1 Web interface of the access controller engine
3) Set up a Web configuration environment, as shown in Figure 5-2 .
Figure 5-2 Set up a Web configuration environment
4) Log in to the switching engine through IE. Launch IE on the Web-based network management
terminal (your PC) and enter http://192.168.0.101 in the address bar. (Make sure a route is
available between the Web-based network management terminal and the switching engine.)
5) When the login authentication interface (as shown in Figure 5-3 ) appears, enter the user name and
the password configured in step 2 and click Login to bring up the main page of the Web-based
network management system.
Figure 5-3 The login page of the Web-based network management system
Configuring the Login Banner
Configuration Procedure
If a login banner is configured with the header command, when a user logs in through Web, the banner
page is displayed before the user login authentication page. The contents of the banner page are the
login banner information configured with the header command. Then, by clicking <Continue> on the
banner page, the user can enter the user login authentication page, and enter the main page of the