Introduction – H3C Technologies H3C WX3000 Series Unified Switches User Manual
Page 55
1-1
5
Logging In from the Web-Based Network
Management System
When logging in from the Web-based network management system, go to these sections for
information you are interested in:
z
z
Setting Up a Web Configuration Environment
z
z
Enabling/Disabling the WEB Server
Introduction
The device has a Web server built in. It enables you to log in to switching engine from a Web browser
and then manage and maintain the device intuitively by interacting with the built-in Web server.
To log in to the built-in Web-based network management system of the switching engine, you need to
perform the related configuration on both the switching engine and the PC operating as the network
management terminal.
Table 5-1
Requirements for logging in to the switching engine from the Web-based network
management system
Item
Requirement
The VLAN interface of the switching engine is assigned an IP address, and the
route between the switching engine and the Web network management terminal is
reachable. (Refer to IP Address and Performance and Routing Protocol in H3C
WX3000 Series Unified Switches Switching Engine Configuration Guide
for related
information.)
Switching engine
The user name and password for logging in to the Web-based network
management system are configured.
IE is available.
PC operating as the
network management
terminal
The IP address of the VLAN interface of the switching engine, the user name, and
the password are available.