H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 530)

49-17
# Configure the authentication mode as password. Authentication timeout time, retry number, and
update time of the server key adopt the default values.
[device] ssh user client001 authentication-type password
# Specify the service type as SFTP.
[device] ssh user client001 service-type sftp
# Enable the SFTP server.
[device] sftp server enable
2) Configure the SFTP client (Switch A)
# Configure the IP address of the VLAN interface on Switch A. It must be in the same segment with the
IP address of the VLAN interface on Switch B. In this example, configure it as 192.168.0.2.
<device> system-view
[device] interface vlan-interface 1
[device-Vlan-interface1] ip address 192.168.0.2 255.255.255.0
[device-Vlan-interface1] quit
# Connect to the remote SFTP server. Enter the user name “client001” and the password “abc”, and
then enter SFTP client view.
[device] sftp 192.168.0.1
Input Username: client001
Trying 192.168.0.1 ...
Press CTRL+K to abort
Connected to 192.168.0.1 ...
The Server is not authenticated. Do you continue to access it?(Y/N):y
Do you want to save the server's public key?(Y/N):n
Enter password:
sftp-client>
# Display the current directory of the server. Delete the file z and verify the result.
sftp-client> dir
-rwxrwxrwx 1 noone nogroup 1759 Aug 23 06:52 config.cfg
-rwxrwxrwx 1 noone nogroup 225 Aug 24 08:01 pubkey2
-rwxrwxrwx 1 noone nogroup 283 Aug 24 07:39 pubkey1
drwxrwxrwx 1 noone nogroup 0 Sep 01 06:22 new
-rwxrwxrwx 1 noone nogroup 225 Sep 01 06:55 pub
-rwxrwxrwx 1 noone nogroup 0 Sep 01 08:00 z
Received status: End of file
Received status: Success
sftp-client> delete z
The following files will be deleted:
/z
Are you sure to delete it?(Y/N):y
This operation may take a long time.Please wait...
Received status: Success
File successfully Removed
sftp-client> dir
-rwxrwxrwx 1 noone nogroup 1759 Aug 23 06:52 config.cfg
-rwxrwxrwx 1 noone nogroup 225 Aug 24 08:01 pubkey2
-rwxrwxrwx 1 noone nogroup 283 Aug 24 07:39 pubkey1