H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 559)

53-1
53
Basic System Configuration and Debugging
Basic System Configuration
Follow these steps to perform basic system configuration:
To do… Use the command… Remarks
Set the current date and
time of the system
clock datetime HH:MM:SS
{ YYYY/MM/DD |
MM/DD/YYYY
}
Required
Execute this command in user view.
The default value is 23:55:00 04/01/2000 when
the system starts up.
Set the local time zone
clock timezone zone-name
{ add | minus } HH:MM:SS
Optional
Execute this command in user view.
By default, it is the UTC time zone.
Set the name and time
range of the summer time
clock summer-time
zone_name { one-off |
repeating } start-time
start-date end-time end-date
offset-time
Optional
Execute this command in user view.
z
When the system reaches the specified start
time, it automatically adds the specified
offset to the current time, so as to toggle the
system time to the summer time.
z
When the system reaches the specified end
time, it automatically subtracts the specified
offset from the current time, so as to toggle
the summer time to normal system time.
Enter system view from
user view
system-view —
Set the system name of
the device
sysname sysname
Optional
By default, the name is device.
Return from current view to
lower level view
quit
Optional
If the current view is user view, you will quit the
current user interface.
Return from current view to
user view
return
Optional
The composite key Ctrl+Z has the same effect
with the return command.
Displaying the System Status
To do… Use the command… Remarks
Display the current date and time of the
system
display clock
Display the version of the system display version
Display the information about users logging
onto the device
display users [ all ]
Available in any view