Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 13)

13
Panel Descriptions
About SD Card
Using an SD card lets you do the following.
¹ Record video or audio
¹ Load video or audio files
¹ Import/export still images or setting files
SD cards that can be used on the VR-120HD
SDXC card can be used on the VR-120HD.
Some SD card types or SD cards from some manufacturers may not
properly record audio/video with the VR-120HD.
Refer to the support page on the Roland website for
the latest information on compatibility.
https://roland .cm/vr-120hd
NOTE
Before you can use a commercially available SD card with the
VR-120HD, you must format it as described in “Formatting an SD
Card”.
Inserting the SD Card
1 . Push the SD card all the way into the
SDXC card slot until you hear a click.
NOTE
Ensure that the SD card is oriented correctly, and
insert it all the way into the port. Do not forcibly
push the card into place.
Formatting an SD Card
1 . Press the [MENU] button
Ó
“SD Card/USB Memory”
Ó
select “Format” and press the [VALUE] knob.
A confirmation message appears.
2 . Select “OK” and press the [VALUE] knob.
The SD card is now formatted.
Removing an SD Card
1 . Press the [MENU] button
Ó
“SD Card/USB Memory”
Ó
“SD Card” select “Eject” and press the [VALUE] knob.
2 . Select “OK” and press the [VALUE] knob.
Once the message “The SD Card is safe to remove” is displayed on the
screen, you can safely remove the card.
3 . Push the SD card further into the slot.
4 . Hold the SD card and pull it out towards you.
About USB Flash Drive
Using a USB flash drive lets you do the following.
¹ Load video or audio files
¹ Import/export still images or setting files
USB Flash Drives that can be used on the VR-120HD
Use a commercially available USB flash drive.
NOTE
Before you can use a commercially available USB flash drive with
the VR-120HD, you must format it as described in “Formatting a USB
Flash Drive”.
Formatting a USB Flash Drive
1 . Connect the USB flash drive to the USB HOST port.
* Ensure that the USB flash drive is oriented
correctly, and insert it all the way into the port.
Do not use excessive force.
Front panel
2 . [MENU] button
Ó
“SD Card/USB Memory”
Ó
“USB MEMORY”
Ó
select “Format”, and press the [VALUE]
knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 . Use the [VALUE] knob to select “OK”, and press the [VALUE]
knob.
USB Memory is now formatted.
Removing a USB Flash Drive
1 . Press the [MENU] button
Ó
“SD Card/USB Memory”
Ó
“USB Memory” select “Eject” and press the [VALUE] knob.
2 . Select “OK” and press the [VALUE] knob.
Once the message “The USB Memory is safe to remove” is displayed on
the screen, you can safely remove the card.
3 . Unplug the USB flash drive.
NOTE
¹ SD cards or USB flash drives that are formatted on a different device might not work normally on the VR-120HD. Be sure to format the media on the
VR-120HD (SD card: exFAT format, USB flash drive: FAT32 format).
¹ Never turn off the power or remove the SD card or USB flash drive while the message “Processing...” is shown.
¹ Formatting the media erases all data saved on the SD card or USB flash drive (such as recorded video, audio and still image data). If the storage
media contains important data, back the data up to your computer before you format it.