Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 87)

87
Other Functions
Loading
Here’s how to load the sequencer settings that are saved on a storage.
When you load settings, the current sequencer settings are overwritten.
1 . [MENU] button
Ó
“Sequencer”
Ó
select
“Load From Storage”, and press the [VALUE] knob.
The sequence files in the storage are listed.
* Use the “SD Card” or “USB Memory” selector at the top right-hand
corner of the screen to switch between the storage media to load
from.
2 . Touch the sequence file that you want to load.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 . Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
The sequencer settings are loaded. When the operation is finished, the
message “Completed” appears.
4 . Press the [MENU] button to close the menu.
Initializing the Sequencer
Here’s how to initialize the sequencer and erase all the settings.
1 . [MENU] button
Ó
“Sequencer”
Ó
select “Initialize”, and
press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 . Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
3 . Press the [MENU] button to close the menu.
MEMO
About the sequencer demo data
Once you perform a factory reset (p. 99), any demo data you have
edited or deleted is restored to its factory default settings.