Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 79)

79
Other Functions
Initializing a Macro
You can initialize a macro and completely erase its settings.
1 . Follow steps 1–3 in “Recording a Macro” (p. 75) to bring
up the macro setup screen.
2 . Touch <Initialize>.
The “Initialize” text blinks.
3 . Touch the macro to initialize.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 . Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
The macro is initialized.
MEMO
About the macro demo data
Once you perform a factory reset (p. 99), any demo data you have
edited or deleted is restored to its factory default settings.
Renaming a Macro
Here’s how to rename a macro.
1 . Follow steps 1–3 in “Recording a Macro” (p. 75) to bring
up the macro setup screen.
2 . Touch the macro to rename.
3 . Touch <Name Edit>.
This brings up the software keyboard for input.
4 . Input the macro name.
* You can input up to 8 characters.
5 . Touch <Enter> in software keyboard.
This changes the macro’s name.