Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 8)

8
Panel Descriptions
Connecting Bluetooth® Devices
Use the Bluetooth features of the VR-120HD to connect it to your Bluetooth-compatible mobile device. This lets you do the following:
¹ Input the audio signals from your Bluetooth audio device.
¹ Use dedicated app “VR-120HD Remote” to remotely control the VR-120HD from an iPad (p. 100).
* For more on connecting (pairing) with a dedicated app, see the app’s Owner’s Manual.
* VR-120HD Remote is planned to be updated for compatibility with this unit.
Registering a Bluetooth Audio Device (Pairing)
To connect a Bluetooth device to this unit, you must pair (register) the
device with the unit.
Once you pair the device with this unit, there is no need to do it again.
* To connect a Bluetooth device that’s already paired, refer to
“Connecting an Already-Paired Bluetooth Device” on this page.
* See the Owner’s Manual for the Bluetooth device you want to pair for
details on the necessary operations.
1 . Place the Bluetooth device nearby the VR-120HD.
2 . Press the [MENU] button
Ó
“System”
Ó
select “Bluetooth
Pairing”.
3 . Press the [VALUE] knob to change the setting to “ON”.
The VR-120HD’s Bluetooth function turns on.
4 . Use the [VALUE] knob to select “Pairing”, and press the
[VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
5 . Use the [VALUE] knob to select “OK”, and press the [VALUE]
knob.
Pairing begins.
The following message is shown when the unit is pairing.
“Now Pairing . . .”
6 . Turn on the Bluetooth function of the Bluetooth device.
7 . Display the Bluetooth device screen on your Bluetooth
device, and select “Roland VR-120HD Audio”.
Once pairing is successful, the message on the VR-120HD changes to
“Completed”.
8 . Press the [MENU] button to close the menu.
Connecting an Already-Paired Bluetooth Device
1 . Turn on the Bluetooth function of the Bluetooth device.
2 . Turn on the Bluetooth function of the VR-120HD.
The onscreen Status display on the VR-120HD changes to “Connected”
when the connection is successful.
* If connection does not succeed, select “Roland VR-120HD Audio” in the
Bluetooth device screen on your Bluetooth device.
MEMO
¹ You can also check the (Bluetooth) indicator for the connection
status.
Lit Connected
Rapid
blinking
Now pairing
Unlit Bluetooth off Blinking
Waiting for
connection
¹ Pair again in the following cases:
– When the pairing data has been deleted from the Bluetooth
device
– When the VR-120HD has been reset to its factory-set state
(p. 99).
¹ To remove the Bluetooth connection, deactivate Bluetooth on the
VR-120HD or on your Bluetooth device.
¹ You can assign a function to a USER button for switching
Bluetooth on/off, or for pairing (p. 90).