Copying macro settings, Swapping the macro settings, Other functions – Roland VR-120HD Direct Streaming AV Mixer User Manual
Page 78
78
Other Functions
Copying Macro Settings
Here’s how to copy the settings from one macro to another.
1 .
Follow steps 1–3 in “Recording a Macro” (p. 75) to bring
up the macro setup screen.
2 .
Touch <Copy>.
The “Copy” text blinks.
3 .
Touch the macros: first the copy source and then the copy
destination.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 .
Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
The macro settings are copied.
Swapping the Macro Settings
Here’s how to swap settings between macros.
1 .
Follow steps 1–3 in “Recording a Macro” (p. 75) to bring
up the macro setup screen.
2 .
Touch <Swap>.
The “Swap” text blinks.
3 .
Touch the two macros to swap.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 .
Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
This swaps the settings of the macros.