Compositing a still image with alpha channel, Y (p. 42), Compositing using dsk – Roland VR-120HD Direct Streaming AV Mixer User Manual

Page 42: Video composition operations

Advertising
background image

42

Video Composition Operations

Compositing a Still Image with Alpha Channel

Use alpha channels (areas which contain transparency data) to cut out

still images and place them against different background video as a

composite.

Compositing using DSK

This shows how to composite an image using “DSK 1”.
The steps are the same when using “DSK 2”.

1 .

Press the DSK 1 [SETUP] button to turn on (lit).

The DSK setup screen appears.

2 .

Touch the setup screen to make the following settings.

Parameter

Explanation

DSK Mode

Alpha Key

DSK Source

Specifies the still image with alpha channel.

3 .

Press a VIDEO SWITCHER [1]–[8] button to select the DSK

video source.

Magenta: DSK video source
White:

Video input available

Unlit:

Video input unavailable

* When selecting a video that is not assigned to Input 1–8, set this in

“DSK Source” on the setup screen.

MEMO

You can also directly touch the multi-view, input-view or still-view

screens to select a video signal.

4 .

Press the DSK 1 [PVW] button to turn on the preview output

(lit).

A preview of the composition results is displayed in the PVW section

of the multi-view.
At this stage, the final output has not yet been changed.

5 .

Touch the setup screen to adjust the intensity of the effect.

Parameter

Explanation

Mix Level

Adjusts the key’s overall density (output level).

Time

Adjusts the fade-in/out time for the DSK video

source.

* For details on the parameters, refer to “6: DSK” (p. 108).

6 .

Press the DSK 1 [PGM] button to turn on DSK compositing

(lit).

The composition results is sent to final output.

7 .

To turn off DSK compositing, press the DSK 1 [PGM] button

once again.

Turning DSK/PinP composition on/off in tandem

with video transitions

You can make DSK/PinP composition turn on/off in tandem with the

video transitions.
From the [MENU] button

Ó

“System”, set “Effects Transition Sync” to “ON”.

After step 4, use the [AUTO] and [CUT] buttons to switch the video. DSK

composition turns on, and the composited result that is previewed is sent

to final output.

Alpha channel

Background video

Still image

Advertising