Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 71)

71
Other Functions
Saving/Recalling Settings (Scene Memory)
You can save the current settings, including the video/audio settings and the state of the operating panel, in scene memory and recall those settings for use
when necessary.
The VR-120HD is provided with 32 scene memories.
* The demo data in this unit includes some scene memories by factory default.
About the Last Memory function
The VR-120HD has a built-in Last Memory feature. Last Memory is a feature that saves the state of the unit that is in effect immediately before
power-down, and automatically restores the state at the next startup. The Last Memory feature is enabled by default.
If you want the unit to recall a scene memory when it starts up, press the [MENU] button
Ó
“Scene Memory”
Ó
“Start Up” to specify the scene
memory number.
Saving to a Scene Memory
Only for scene memories 1–8
1 . Press the [SCENE MEMORY] button.
2 . Long-press the VIDEO SWITCHER button for the number
where you want to save the settings.
Blue: Memories in which settings are saved
Light blue: Currently selected memory
Unlit: Memories with no settings
Long-press
All VIDEO SWITCHER buttons briefly light up blue, and the current
settings are saved in the selected scene memory.
Scene memory 1–32
1 . With the [SCENE MEMORY] button lit up, press the MODE
[SETUP] button.
The Scene Memory setup screen appears.
Selector for number
of items shown
Displayed number selector
2 . Touch <Save>.
The “Save” text blinks.
3 . Touch the area of the scene memory number where you
want to save.
A confirmation message appears.
4 . Select “OK” and press the [VALUE] knob.
This saves the current settings to the selected scene memory.
MEMO
¹ About scene memories 9–32
You can use the buttons to save or recall scene memories 9–32.
Press the [MENU] button and select “Scene Memory”
Ó
“Button Assign” to set the memory to recall for each VIDEO
SWITCHER button.
¹ You can prohibit settings from being saved or initialized (p. 72) to
protect the scene memories.
Use the [MENU] button
Ó
“Scene Memory”
Ó
and set
“Memory Protect” to “ON”.
¹ Since settings related to the system, network and so on are
common to the entire unit, they are not saved in a memory.
¹ About the demo data
Once you perform a factory reset (p. 99), any demo data you
have edited or deleted is restored to its factory default settings.