Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 25)

25
Video Operations
Beat sync
1 . On the setup screen for the auto-switching function, touch
<Type> to select “Beat Sync”.
The setup screen changes accordingly.
2 . Touch the screen to access the settings.
Menu item Explanation
Sync Source
Specifies the input audio that synchronizes
the video.
Scan Sequence
Specifies the order in which video signals are
shown.
Normal:
Switches in the order of Input 1
Ó
8.
Reverse:
Switches in the order of Input 8
Ó
1.
Random:
Switches randomly.
Scan Transition Time Specifies the video transition time.
Scan Cycle
Specifies the number of beats at which to
switch to the next video.
Scan Target
Sets the video to which auto switching is
applied.
Video Input:
Final output video and preview video
PinP & Key 1–4:
PinP and key layer (inset screen) video
DSK 1–2:
DSK layer (inset screen) video
* For details on the parameters, refer to “20: Auto Switching” (p. 141).
3 . Press the [SETUP] button to close the screen.
MEMO
When an auto-switching function is assigned to a USER button and
the operating mode is set to beat sync, the USER button blinks in
time with the current BPM.
Video follows audio
1 . On the setup screen for the auto-switching function, touch
<Type> to select “Video Follows Audio”.
The setup screen changes accordingly.
2 . Touch the screen to access the settings.
Menu item Explanation
Audio In 1–9/10
Target,
USB In Target,
Bluetooth In Target,
Audio Player Target,
HDMI 1–6 Target,
SDI 1–6 Target,
V. Player Target
Specifies the video that is output when
audio is detected.
Threshold
Specifies the reference level at which the
Video Follows Audio function operates.
When audio that exceeds this threshold is
detected, the video is switched.
Audio Mix Target
Specifies the video that is output when
audio is detected in multiple mics. If this is
“Off”, video is switched in the order in which
audio is detected.
Audio Silent Target
Specifies the video that is output when
there is no audio input from any mic. If this
is “Off”, the last selected video continues to
be output.
Audio Redetection
Time
Specifies the time after the video has
switched until audio detection resumes.
Scan Transition Time Specifies the video transition time.
* For details on the parameters, refer to “20: Auto Switching” (p. 141).
3 . Press the [SETUP] button to close the screen.