Livestreaming via twitch, Live streaming, Getting ready – Roland VR-120HD Direct Streaming AV Mixer User Manual
Page 67
67
Live Streaming
Livestreaming via Twitch
Getting ready
Ã
Create a Twitch account beforehand.
Ã
Make sure that the VR-120HD is connected to the Internet for
livestreaming.
Ã
To record audio/video, set Audio Rec and Video Rec to “On”
Operating this unit
1 .
On the streaming/recording setup screen (page 2), touch
either <Service 1> or <Service 2> and select “Twitch”.
2 .
Touch <Use Web Application>.
The shortened URL and QR code for the Web app are shown.
Operating your computer or smartphone
3 .
On the Web browser of your computer or smartphone, open
the link that’s shown.
4 .
Log in to your Twitch account.
5 .
Select the server to connect to in “Select ingest server
location”.
To stream your content in a more stable network environment, select
a server in a region that’s close to you.
* You can still livestream, regardless of which server you choose.
6 .
Click “SUBMIT TO DEVICE!”.
When the data transmission is finished, the message “Success”
appears.
The URL and stream key are applied to the VR-120HD.
NOTE
Don’t close the QR code screen until the “URL” and “Stream Key”
have been applied.
7 .
Click “OK”.
8 .
Close the page.
Operating this unit
9 .
Select page 1 on the streaming/recording setup screen.
The parameters for stopping/starting the livestream, audio and video
recording are shown in the status area.
10.
Touch <ON AIR>.
The message “Are you sure you want to start streaming?” is shown.
11.
Touch <OK>.
Livestreaming starts.
If audio/video recording is turned on, the audio/video starts at the
same time as the livestream.
12.
Touch <ON AIR> once more to stop streaming.
The message “Are you sure you want to stop streaming?” is shown.
13.
Touch <OK>.
The livestream ends.
MEMO
You can assign streaming start/stop to the USER buttons.
On the User Assign screen, select the “Stream/Record” Category, and
select “Start/Stop” for Value.