Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 84)

84
Other Functions
Running the Sequencer
Press the button to make the functions recorded in the sequencer
execute one at a time.
1 . Press the USER [4] (SEQUENCER) button to turn the
sequencer function on (the button lights up).
The sequencer execution screen is shown, where you can check the
list of operations that are recorded to the sequencer.
2 . Press the [AUTO] (NEXT) button.
The first function in the list is executed.
The button blinks while the function is executing. When the function
ends, the button remains lit.
3 . Press the [AUTO] (NEXT) button at the timing when you
want the next function to execute.
The function is executed.
[CUT] (PREVIOUS) button
Press the [CUT] button if you want to return to the state at which
the previous function was completed.
MEMO
You can also touch <NEXT> or <PREVIOUS> on the screen to
operate the sequencer.
4 . Repeat step 3.
5 . Press the USER [4] (SEQUENCER) button again to turn the
sequencer function off.
MEMO
Repeatedly executing a function in the list
You can repeatedly execute functions that are in a list. Once the last
function is finished, press the [AUTO] button to execute the function
at the beginning of the list.
Use the [MENU] button
Ó
“Sequencer”
Ó
and set “Repeat Execute”
to “ON”.
Executing a function from the middle of the list
When you directly touch the desired operation in the list, <Jump>
is shown. Touch <Jump> to set that line’s operation as completed.
You can press the [AUTO] button to execute the next operation
afterwards.