Konica Minolta bizhub PRESS C8000e - Manual (Page 109)

bizhub PRESS C8000/e 3-45
3.1 Machine Configuration 3
No. Name Description
1 Multi Punch GP-501 front door Opens to allow replacement of a die set, or removal
of punch waste or mishandled paper.
2 Lever [GP1] Opens upward for removal of mishandled paper.
3 Knob [GP3] Turned to allow removal of mishandled paper.
4 Lever [GP2] Opens upper-rightward for removal of mishandled pa-
per.
5 Knob [GP4] Turned clockwise for replacement of a die set or re-
moval of mishandled paper.
6 Die set Punches various types of file holes.
7 Scrap box Holds waste paper punched out.
8 Power switch Turned on to use the multi punch.
9 Lever [GP5] Opens downward for removal of mishandled paper.
10 Knob [GP7] Turned to allow removal of mishandled paper.
11 Die set blade position indicator Used to check the position of the die set blade moved
by turning knob [GP4] for replacement of the die set
or removal of mishandled paper.
12 Lever [GP6] Opens upper-leftward for removal of mishandled pa-
per.
13 Knob [GP8] Turned to allow removal of mishandled paper.
14 Die set rack Stored with die sets.