Konica Minolta bizhub PRESS C8000e - Manual (Page 307)

bizhub PRESS C8000/e 8-29
8.5 If [MACHINE] Tab Flashes in Orange 8
8.5.5 Inconformity in Paper Conditions During a Print Job in Progress
If paper of the conditions (other than the paper size) specified for print data currently transmitted is not loaded
in any tray, the machine temporarily stops its operation.
NOTICE
The conditions defined here include the following provided as paper setting items:
- Profile No.: Not subject to inconformity
- Paper Type
- Profile Name: Not subject to inconformity
- Weight: Not subject to inconformity when not specified from an image controller
- Colored Paper
- Punch
- Tab Number: Subject to inconformity only when Tab Paper is specified for Paper Size
At this time, one of the following messages is displayed:
When received print data designates a paper tray,
[Please load designated paper in tray # / To check details, touch [Confirm Details]]
When received print data does not designate a paper tray,
[Please load designated paper or / touch [Confirm Details] and select tray]
To release the machine suspension and start printing, three methods are provided:
- Loading the designated tray with paper
- Specify the tray designated by received print data with the required paper conditions, and load that tray
with corresponding paper.
- Loading another tray with paper
- If the message does not mention a tray number, specify a desired tray with paper conditions required
by received print data, and then load that tray with corresponding paper.
- Forcibly using paper loaded in a tray
Follow each procedure to start the print job.
Loading the designated tray with paper
When the message shown below is displayed, change the paper setting of the designated tray (Current Set-
ting) to that required by the print data (Reserved Setting). Load the tray with paper that conforms to specified
conditions, and then start printing.