Konica Minolta bizhub PRESS C8000e - Manual (Page 632)

12.9 Operator Call 12
bizhub PRESS C8000/e 12-58
82-01 Main body Print count has reached the
user limit or account limit
specified by the administra-
tor who is responsible for the
management of your ma-
chine. Contact your administrator.
101-00 Finisher FS-
531/FS-612 The primary (main) tray re-
mains lowered, or output
sheets are left on the prima-
ry (main) tray. Remove the output sheets from
the primary (main) tray.
101-01 Finisher FS-
531/FS-612 Output sheets are left on the
primary (main) tray. Remove the output sheets from
the primary (main) tray.
102-00 Finisher FS-521 The primary (main) tray re-
mains lowered, or output
sheets are left on the primary
(main) tray. Remove the output sheets from
the primary (main) tray.
102-01 Finisher FS-521 Output sheets are left on the
primary (main) tray. Remove the output sheets from
the primary (main) tray.
103-00 Saddle Stitcher
SD-506 Printing operation cannot
start because the saddle
stitcher tray is not with-
drawn. Fully withdraw the saddle stitcher
tray. For details, see Section 9 of
the User's Guide - Copier.
103-01 Saddle Stitcher
SD-506 Saddle Stitcher SD-506
stopped abnormally. Make sure Saddle Stitcher
SD-506 is firmly plugged in the
power outlet of Relay Unit RU-
508, and then securely close the
right side door and left side door
of the saddle stitcher.
103-02 Saddle Stitcher
SD-506 Output sheets are left inside
Saddle Stitcher SD-506. Remove the output sheets from in-
side Saddle Stitcher SD-506.
104-00 Folding Unit FD-503 The primary (main) tray re-
mains lowered, or output
sheets are left on the prima-
ry (main) tray. Remove the output sheets from
the primary (main) tray.
104-01 Folding Unit FD-503 Output sheets are left on the
primary (main) tray. Remove the output sheets from
the primary (main) tray.
104-02 Folding Unit FD-503 Folding Unit FD-503
stopped abnormally. Make sure Folding Unit FD-503 is
firmly plugged in the power outlet
of Relay Unit RU-508, and then
securely close the front door of the
saddle stitcher.
105-00 Large Capacity
Stacker LS-505 (1st
unit if two units are
combined) Output sheets are left on the
stacker of Large Capacity
Stacker LS-505. Remove the output sheets from
the stacker. For details, see Sec-
tion 5 of the User's Guide - Copier.
105-01 Large Capacity
Stacker LS-505 (1st
unit if two units are
combined) Large Capacity Stacker
LS-505 stopped abnormally. Make sure Large Capacity
Stacker LS-505 (1st unit if two
units are combined) is firmly
plugged in the power outlet of Re-
lay Unit RU-508.
105-02 Large Capacity
Stacker LS-505 (1st
unit if two units are
combined) The stacker of Large Ca-
pacity Stacker LS-505 (1st
unit if two units are com-
bined) is rising. Wait until the stacker automatical-
ly stops rising.
105-03 Large Capacity
Stacker LS-505 (1st
unit if two units are
combined) The stacker of Large Ca-
pacity Stacker LS-505 (1st
unit if two units are com-
bined) is moving down. Wait until the stacker automatical-
ly stops moving down.
Code Location Cause Remedy