Konica Minolta bizhub PRESS C8000e - Manual (Page 138)

4.1 Paper Information 4
bizhub PRESS C8000/e 4-16
7CAUTION
DO NOT put your hand or arm between the main body and 2nd fusing unit.
- If you put your hand or arm between the main body and 2nd fusing unit, unexpected trouble may be
caused. Please do not try to work yourself, but contact your service representative.
1
Check the paper type and weight of the output sheet printed with the image that shows unevenness.
2
Open the main body front door.
3
Turn down the lever [M1] leftward, then withdraw the convey-
ance fixing unit.
4
According to the paper type and weight checked in step 1,
move the compression adjusting lever of the main body fixing
unit to the proper position.
% Check the proper position of the compression adjusting le-
ver by the table on page 4-15.
5
Return the main body fixing unit to its original position, then reset the lever [M1].
Release Low compression Compression