Konica Minolta bizhub PRESS C8000e - Manual (Page 430)

10.1 Utility Menu Screen Outlines 10
bizhub PRESS C8000/e 10-16
[02 Finisher Adjustment] (Finisher FS-612)
This menu item is to be displayed and allowed on the machine mounted with Finisher FS-612.
[01 Saddle Stitcher Stopper]
Adjust the staple positions in widthwise di-
rection of paper determined in Fold & Sta-
ple mode. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8.125 e 13.25 w, 8.5 e 13 w, 8.25 e 13 w,
8 e 13 w, 8K w, 16K w, Custom (380-460
mm), Custom (220-379 mm)
Adjustable range:
-128 to +127
(1 step = 0.1 mm)
[02 Half-Fold Stopper Adj.]
Adjust the misalignment in edges of output
sheets for each paper size. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8.125 e 13.25 w, 8.5 e 13 w, 8.25 e 13 w,
8 e 13 w, 8K w, 16K w, Custom (380-460
mm), Custom (220-379 mm)
Adjustable range (top of output sheet):
-128 (Long) to +127 (Short)
(1 step = 0.1 mm)
[03 Punch Adjustment]
This menu item is to be displayed and allowed on the machine mounted with Punch Kit
PK-512/PK-513, which is to be installed in Finisher FS-612.
[01 Vertical Position Adj.]
Adjust the misalignment in center posi-
tions of paper and punch holes for
each paper size. Objects of adjustment:
Full Area, A3 w, B4 w, A4 w/v, B5 w/v,
A5 w/v, 11 e 17 w, 8.5 e 14 w, 8.5 e 11
w/v, 5.5 e 8.5 w/v, 8.125 e 13.25 w, 8.5
e 13 w, 8.25 e 13 w, 8 e 13 w, 8K w, 16K
w/v, 9 e 11 v
Adjustable range:
-50 (Backward) to +50 (Forward)
(1 step = 0.1 mm)
[02 Horizontal Position Adj.]
Adjust the distance from the edge of
the output sheet to the center of punch
holes. Objects of adjustment:
PI Tray, Main Body Tray
Adjustable range:
-50 (Wide) to +50 (Narrow)
(1 step = 0.1 mm)
[03 Registration Adjustment]
Adjust the registration amount if punch
positions are inclined. Objects of adjustment:
Main Body/Reverse, Main Body/ADU, PI 1
Tray, PI 2 Tray
Adjustable range:
-20 to +20
(1 step = 0.8 mm)
[04 Paper Edge Detect Sensor]
Detect the edge of paper to be a refer-
ence point in punching operation. Start
[04 Tri-Fold Adjustment]
Adjust the tri-folded positions for each pa-
per size. Objects of adjustment:
Full Area, A4 w, 8.5 e 11 w, 16K w
Adjustable range:
-128 (Leftward) to +127 (Rightward)
(1 step = 0.1 mm)
[05 2 Pos. Staple Pitch Adj.]
Adjust the staple pitch determined in Fold
& Staple and Staple modes. Objects of adjustment:
Fold & Staple, Staple
Adjustable range:
+128 to +160
(1 step = 1 mm)
[06 Post Inserter Tray Size]
This menu item is to be displayed and al-
lowed on the machine mounted with Post
Inserter PI-502, which is to be mounted
on Finisher FS-612.
Adjust the tray size of post inserter. Objects of adjustment:
Upper tray: A4 w, 8.5 e 11 w
Lower tray: A4 w, 8.5 e 11 w
Menu Item/Description Setting options (with default bolded)