Konica Minolta bizhub PRESS C8000e - Manual (Page 214)

5.11 Suspending/Resuming Output to Finisher FS-521 5
bizhub PRESS C8000/e 5-74
5.11 Suspending/Resuming Output to Finisher FS-521
Finisher FS-521 can hold 3,000 output sheets (1,500 sheets for sizes larger than A4 or 500 sheets for smaller
than B5) at maximum on the primary (main) tray.
Follow the procedure below to suspend the current output job in order to take out printed sheets from the
primary (main) tray, and then to restart it.
5.11.1 To Suspend the Output Job
1
Keep the suspension button pressed till the LED starts flash-
ing.
To let the LED flash, keep the suspension button pressed for
approximately one second.
The machine temporarily stops printing, and then the LED of the
suspension button turns steady.
% The suspension button will not function in Staple mode, or
when printed sheets are delivered to another tray than the
primary (main) tray.
2
Take out the printed sheets delivered to the primary (main) tray.
The LED of the suspension button will go out when all sheets
are removed from the primary (main) tray.
% There will be no trouble in restarting the output job with
printed sheets left in the tray. In this case, the LED of the
suspension button will remain lit.
3
Press Start on the control panel to restart the output job.
The machine will resume printing.
% To cancel the output job without restarting it, press Stop on
the control panel. See the following subsection "To cancel
the suspended job" for details.