Konica Minolta bizhub PRESS C8000e - Manual (Page 266)

6.14 Removing Finished Sets from Large Capacity Stacker LS-505 6
bizhub PRESS C8000/e 6-50
5
Return the carriage to its original position, then close the large
capacity stacker door.
NOTICE
When returning the stacker unit to its original position, fit the two
projections of the carriage to the two holes of the stacker unit. If
the stacker unit is not properly set, the carriage cannot be re-
turned to its original position.
6.14.2 To Secure Paper on Carriage
1
Remove the paper stopper from the carriage.
2
Mount the paper stopper on the paper holder.
% Fit the two projections of paper stopper to the holder, then
raise the other side as illustrated.
3
Hold the paper using the paper stopper.
% Turn the paper stopper to the paper.
NOTICE
Do not push it too strong. Otherwise, output sheets may be torn
or wrinkled.