Konica Minolta bizhub PRESS C8000e - Manual (Page 421)

bizhub PRESS C8000/e 10-7
10.1 Utility Menu Screen Outlines 10
[Stop Button Function]
Specify whether to pause or abort a job when
Stop is pressed on the control panel. Job Temp. Stop, Job Stop Function
[Back Side Magnification Adj.]
Specify whether to enable the lens adjustment
mode. ON, OFF
[Tray Change Time]
Select the time to wait before printing becomes
available when selecting another tray loaded with
different paper type after the current job is com-
pleted. Short, Standard
[Prior Paper Type]
Specify whether or not to maintain the tempera-
ture suitable for coated or thin coated paper by
turning the fixing unit roller. Others, Coated, Thin Coated
[Dash Length (Page Stamp)]
Select the length of the dash to be used in a style
of [Page No.] in [Stamp].
This setting is displayed to function on the ma-
chine mounted with Image Controller IC-601. Long, Short
[Center Crop Mark Trim Margin]
Specify the space between the center crop mark
and image area (center crop mark trim margin).
This setting is displayed to function on the ma-
chine mounted with Hard Disk Kit HD-514. 0.0-20.0 mm (default: 1.0 mm)
[Schedule Cross Axis Unit (Init. Value)]
Select the unit of horizontal axis on the Schedule
Screen.
This setting is displayed to function on the ma-
chine mounted with Hard Disk Kit HD-514 and
Image Controller IC-601. Timetable, Time Frame (m), Sheet Volume
[Hold Job for Outputting (Init. Value)]
Select the default for the operation to determine
whether or not to delete hold jobs after being out-
put.
This setting is displayed to function on the ma-
chine mounted with Hard Disk Kit HD-514. Delete, Save
[Destination for HDD Recall (Default)]
Select the default destination of recalled HDD
Store jobs.
This setting is displayed to function on the ma-
chine mounted with Hard Disk Kit HD-514. Print, Hold, Print & Hold
[Offset Output Mode]
Specify how to offset the output sets. Change Out Pos., Partition Paper (Tray 1
to 9, PI 1, PI 2), Stop Print
[Needless Tab Paper Exit]
Specify whether or not to automatically discharge
the oddments of tabbed sheets loaded in a tray as
a set.
This setting functions only on the machine
equipped with Paper Feeder Unit (with scanner)
PF-705. See Section 10 of the User's Guide -
Copier. ON, OFF
[Detect Double Feed JAM]
Specify whether or not to detect the double feed-
ing. ON, OFF
[Fusing Stability (Quick Start)]
Specify whether or not to wait till the machine
completes the warmup to meet controlled tem-
perature conditions for a specified tray when a
print job is queued. Speed, Image Quality
Menu Item/Description Setting options (with default bolded)