Konica Minolta bizhub PRESS C8000e - Manual (Page 565)

bizhub PRESS C8000/e 11-19
11.4 [Controller] - [03 System Setting] 11
11.4 [Controller] - [03 System Setting]
11.4.1 [01 Software Switch Setting]
Select the corresponding switch number in order to address the problems or requirements described in the
following List of Software Switch Setting.
0 All software switches are initially set to Off. Switch from Off to On in order to solve the problem.
0 Never switch from Off to On for the switch number that is not described in the following List of Software
Switch Setting.
1
1
Follow the procedure on page 11-3 to display the Controller Administrator Setting Screen.
2
Press [03 System Setting] and [01 Software Switch Setting] in sequence.
3
Use arrow keys or touch panel keypad to enter the switch number, then select either [On] or [Off].
The detailed information of each switch number, see the following "List of Software Switch Setting."
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the System Setting Screen will be restored.