Konica Minolta bizhub PRESS C8000e - Manual (Page 393)

bizhub PRESS C8000/e 9-75
9.11 [04 Density Balance Adjustment] 9
9.11 [04 Density Balance Adjustment]
9.11.1 [01 Density Balance Chart Output]
There are two methods of density balance adjustment in crosswise direction.
- Create colorimetric data using Spectrophotometer i1iSis XL or i1Pro, then register the data on the ma-
chine.
- Register the density balance data manually.
The colorimetric data can be created and measured by the following procedure.
- Output the density balance chart from the machine.
- Load the density balance chart into the spectrophotometer.
- Create colorimetric data using the data loaded into the spectrophotometer.
- Register the colorimetric data on the machine using a USB flash drive.
This section describes how to output the density balance chart to be loaded into the spectrophotometer.
Setting items in Density Balance Chart Output
- Two spectrophotometers are provided; Spectrophotometer i1iSis XL and Spectrophotometer i1Pro.
Select the desired one.
- Two types of chart, Type 1 (simple checking chart) and Type 2 (detailed checking chart), are provided
for each spectrophotometer. Select the desired one.
- Output a chart individually for each of predefined screen types. [Stochastic], however, cannot be se-
lected to output a chart.
d
Reference
Specify whether to allow or restrict the use of four screens individually in the User Setting. Dot 1, one of the
four screens, cannot be restricted. See page 10-59 for details.
The dot screen and line screen are provided with five types for each, and one for each can be specified in the
Administrator Setting. See page 10-79 for details.