Konica Minolta bizhub PRESS C8000e - Manual (Page 365)

bizhub PRESS C8000/e 9-47
9.7 [03 Finisher Adjustment] (Saddle Stitcher SD-506) 9
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [03 Finisher Adjustment], [06 Saddle Stitcher Pos. Adj.], and [05 Tri-Fold Position Adj.] in se-
quence.
3
Select the size to be adjusted.
4
Press [Print Mode].
5
Load the paper size to be adjusted into a tray, then select that tray key.
6
Press Start on the control panel. A sample pattern will be output.
7
Measure the lengths (a) and (b) of the output sheet.
Allowance: a +/- 1.5 mm, b +/- 1.5 mm
8
If any adjustment is required, press [Exit Print Mode] to return to the Tri-Fold Position Adjustment
Screen.
9
Select [Single Fold].
10
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
% Adjustable range: Single Fold: -100 (Short) to +100 (Long) (1 step = 0.1 mm) Double Fold: -100
(Long) to +100 (Short) (1 step = 0.1 mm)
% The measurement (b) in step 7 will decrease with positive value entered, and increase with negative
value entered.
11
Select [Double Fold].
Paper size a b
A4 w 97.5 +/- 2.0 mm 102.0 +/- 2.0 mm
8.5 e 11 w 91.6 +/- 2.0 mm 96.1 +/- 2.0 mm
[1] Single Fold [2] Double Fold