Konica Minolta bizhub PRESS C8000e - Manual (Page 628)

12.8 [Network] Tab 12
bizhub PRESS C8000/e 12-54
1
Select the desired option from the drop-down list provided for each setting item. To make an entry, click
the text box to type in. For details of each item, see the following table.
Specification Description Prior confirmation
[Authentication Sta-
tus] Displays the authentication status.
[Succeeded]: Appears when authentication is completed
successfully.
[Now authenticating]: Appears when authentication is in
process.
[Not authenticated]: Appears when authentication is not
yet made.
[Failure]: Appears when authentication has failed.
[Error]: Appears when failed in getting the authentication
status.
Press [Refresh] to get the current authentication status.
[IEEE802.1X Au-
thentication Setting] Select [ON].
[Supplicant Setting] Make the settings required as a supplicant (authentica-
tion client) in order to get authenticated from the authen-
tication server.
Specify each item according to your environment of us-
age.
[User ID] Enter the user ID. (Up to 128 alphanumeric characters)
The user ID is used in all EAP-Types.
[Password is
changed.] Put a check mark when changing the password.
[Password] Enter the password (up to 128 alphanumeric characters).
The password is used in EAP-Types other than [EAP-
TLS].
[EAP-Type] Select the EAP authentication method.
Select [Dependent on server] to perform authentication
using the EAP-Type provided by the authentication serv-
er. Make the supplicant settings needed for this machine
according to the EAP-Type provided by the authentica-
tion server.
Do not select [OFF]. EAP Authentication
[EAP-TTLS] Make the settings related to EAP-TTLS.
[User ID] Enter an anonymous name to be used in the EAP-TTLS
authentication (up to 128 alphanumeric characters).
This setting is available when [EAP-TTLS] or [Dependent
on server] is specified for [EAP-Type].
[Inner Authentica-
tion Protocol] Select the inner authentication protocol of [EAP-TTLS].
This setting is available when [EAP-TTLS] or [Dependent
on server] is specified for [EAP-Type].
[Client Certificates] Use the client certificate of this machine to specify
whether or not to encrypt the authentication information.
This setting is available when the client certificate is in-
stalled in the machine.
The client certificate is requisite when [EAP-TLS] is spec-
ified for [EAP-Type].
This setting is also available when [EAP-TTLS] or [PEAP]
is specified for [EAP-Type].
[Encryption
Strength] Select the encryption strength for the encrypted commu-
nication using TLS.
[Low]: Communicate using all possible keys.
[Middle]: Communicate using keys exceeding 56 bits.
[High]: Communicate using keys exceeding 128 bits.
This setting is available when any option other than [OFF]
or [EAP-MD5] is specified for [EAP-Type].
[Certificate Verifica-
tion Level] Specify the method of verification when you verify the
server certificate.