Konica Minolta bizhub PRESS C8000e - Manual (Page 651)

bizhub PRESS C8000/e 13-17
13.3 Setting Remote Panel, Remote Monitor, and Multi Monitor 13
6
Make settings for Remote Monitor.
% Enter the user label for the Remote Monitor, and select the desired refresh interval.
NOTICE
If you do not make settings other than this setting, click [Registration] at the bottom of the window, and
then click on [Administrator Setup Menu].
7
Make settings for Multi Monitor.
% Specify the IP address of the machine to be monitored. Up to 10 addresses can be entered.
NOTICE
If you do not make settings other than this setting, click [Registration] at the bottom of the window, and
then click on [Administrator Setup Menu].
8
Click on [Registration].
The registered contents will be displayed in the window.
9
Click on [Administrator Setup Menu].
The Machine Manager Setting menu will be restored.