Konica Minolta bizhub PRESS C8000e - Manual (Page 659)

bizhub PRESS C8000/e 13-25
13.5 Transmitting Setting Data 13
% The setting data transmitted to a PC is a TAB separated text file which can be edited using an ap-
plication software such as Text Editor or Table Editor. A new setting data can also be created ac-
cording to the specifications for each file type. See page 13-26 for details.
7
Import the setting data.
% Click on [Browse... ] to locate the setting data file to be imported, then click on [Import...].
The result message will be displayed when the transmission is completed.
NOTICE
Please do not click on [Refresh] on your browser at this time. Click on [Back]. The Setting data Im-
port/Export window will be restored.
NOTICE
Error Messages upon Import and Actions for the Errors
Error message Description
Can't transfer data (The ma-
chine is busy) Try again to import the data after the machine become idle state.
The data cannot be recog-
nized Confirm that the data you are transferring is the machine setting file.
Data size is too large Confirm that the data you are transferring is the machine setting file.
Check also if the file size exceeds 100,000 bytes. If it exceeds
100,000 bytes, you cannot transfer that file.
The data cannot be regis-
tered Check if inappropriate description is made in the machine setting
file. See page 13-5 for details. Check also if the number of registered
items reaches the limit.