Konica Minolta bizhub PRESS C8000e - Manual (Page 501)

bizhub PRESS C8000/e 10-87
10.7 [02 Administrator Setting] - [01 System Setting] 10
10.7.31 [07/08 Perfect Binder Setting] - [01 Usable Paper Weight Select]
Specify the paper weight available for each of body and cover when using the perfect binder.
NOTICE
The title number given to [Perfect Binder Setting] will be [07] for the machine without Image Controller IC-
601, or [08] for the machine with that option mounted.
1
Follow the procedure on page 10-3 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [07/08 Perfect Binder Setting], and [01 Usable Paper Weight Select] in se-
quence.
3
Select the desired paper weight for each of body and cover.
% Use [Unit Change] on the right side of the screen to switch the unit of weight.
NOTICE
If one of the paper weight selected here is not specified for the tray to be used in perfect binding, the
binding operation will become unavailable with an "unsuitable" message displayed.
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Perfect Binder Setting Menu Screen will be
restored.
10.7.32 [07/08 Perfect Binder Setting] - [02 Paper Count Limit for PB]
Specify the minimum and maximum numbers of sheets to be bound as a body set, individually for each paper
weight.
NOTICE
The title number given to [Perfect Binder Setting] will be [07] for the machine without Image Controller IC-
601, or [08] for the machine with that option mounted.