Konica Minolta bizhub PRESS C8000e - Manual (Page 213)

bizhub PRESS C8000/e 5-73
5.10 Using Perfect Binder PB-503 5
5.10.2 Managing the Perfect Binder PB-503 and Glue Pellets
To ensure safety and product reliability, please observe the precautions for using Perfect Binder PB-503 and
glue pellets.
7CAUTION
NEVER touch the thermally melted glue.
- The thermally melted glue is very hot. If you touch them, you may get burned. Handle thermally melted
hot glue only with great care. If you need to clean or replace thermally melted glue, contact your service
representative.
Precautions for the perfect binder
- Use only the glue GC-501 for this binder.
- When you do not use the perfect binder, be sure to turn the heater switch OFF to prevent the deterio-
ration of glue. It is recommended that you adjust the time settings for the low power mode and shut-off
mode of the main body to suit the usage of the Perfect Binder PB-503, since then apply to the binder
as well.
- Do not overload the glue hopper with glue pellets.
- Do not touch the lever in the glue hopper with your hand. It may cause machine trouble.
Precautions for glue pellets
- Glue pellets are not edible. Do not put them in your mouth nor swallow them.
- Keep glue pellets out of reach of children.
- Store glue pellets in dark, cool indoors, avoiding direct sunlight or exposure to water. The storage tem-
perature is between 5 and 35 degrees Celsius.
- Glue pellets may become degraded by such products as common oils, organic solvents, solvents used
in ink formulations, or volatile fragrances. Such degradation may cause deterioration in adhesiveness,
resulting in poor binding performance.