Konica Minolta bizhub PRESS C8000e - Manual (Page 436)

10.1 Utility Menu Screen Outlines 10
bizhub PRESS C8000/e 10-22
[Fusing Stability (Mixed Media)]
Specify whether or not to wait till the machine
completes the warmup for a tray to be switched
from the one currently used, if they have different
temperature while operating a print job with multi-
ple trays specified. Speed, Image Quality, Best Quality
[06 System Connection]
[01 Administrator Call]
Press [Start] to call your service representative via
CS Remote Care. Start
[07 Security Setting]
[01 Administrator Password]
Change the administrator password. 12345678
[02 HDD Management Setting]
Make settings concerning the security management of the HDD.
This setting is displayed to function on the machine mounted with Hard Disk Kit HD-514.
[01 HDD Lock Password]
Change the HDD lock password. -
[02 Delete Temp. Data Setting]
Specify whether or not to overwrite and delete
the image data temporarily stored on the
memory. Select also an erase mode for over-
writing. Setting Switch: ON, OFF
Erase Mode: Mode 1, Mode 2
[03 Delete All Data Setting]
Select an erase mode for the data stored on
the HDD of the machine or on non-volatile
memories, which should be deleted by being
overwritten with a specific data. You can actu-
ally overwrite and delete the data in this oper-
ation. This function is useful when disposing
the machine. Erase Mode: Mode 1 to 8
[04 Delete hold Job]
Use this function to delete hold jobs. -
[05 Delete HDD Job]
Use this function to delete the jobs stored on
the HDD. -
[06 HDD Restore/Backup]
Make a backup of, or restore the HDD. -
[01 HDD ALL Backup]
Make a backup of all the data stored on the
HDD onto the external storage medium. Start
[02 HDD ALL Restore]
Restore the backup data from the external
storage medium onto the HDD. Start
[03 HDD BOX Backup]
Make a backup of the data stored in the
backup folder of the HDD onto the external
storage medium. Start
[04 HDD BOX Restore]
Restore the backup data from the external
storage medium into the backup folder of
the HDD. Start
[02/03 Enhanced Security Mode]
Specify whether or not to activate the Enhanced
Security mode. ON, OFF
Menu Item/Description Setting options (with default bolded)