Konica Minolta bizhub PRESS C8000e - Manual (Page 259)

bizhub PRESS C8000/e 6-43
6.10 Loading Tabbed Sheets 6
4
Move the side guides to the edge of tabbed sheets.
% Align the tabbed sheets to the feed roller side of the tray.
% Press the lock release lever of the front side guide to move the guides, and also move the rear
guide to the edge of tabbed sheets.
NOTICE
Be sure that the side guides and rear guide are securely aligned to the paper. Otherwise, the machine
cannot detect the correct paper size, and machine trouble may be caused.
5
Push in the tray until it locks into place.
6.10.2 Loading Tabbed Sheets in Paper Feeder Unit PF-704
The paper feeder unit is of the following two models.
- Paper Feeder Unit PF-704 (trays 4 to 9)
- Paper Feeder Unit (with scanner) PF-705 (trays 4 to 6)
Example: 9 tabbed sheets loaded in position for 3 finished sets
1
Withdraw the tray to be loaded with tabbed sheets.
Withdraw the tray specified for a tab paper size.
2
Turn the two guide fixing knobs of the side guides counterclockwise to loosen them.
3
Load tabbed sheets into the tray.
% Place tabbed sheets on the paper feeder unit tray referring to the illustration shown above.
NOTICE
Do not load above the limit level indicated on the side guide of the tray.
4
Align the side guides to the edge of tabbed sheets, then turn the guide fixing knobs clockwise to fix
them.
NOTICE
Be sure that the side guides and rear guide are securely aligned to tabbed sheets. If 1 mm or more of
a gap is found or tabbed sheets skew in the tray, feeding trouble may be caused.
5
Align the rear guide to tabbed sheets.
6
Push in the tray until it locks into place.
Loading orientation Stacking order Finished set
Rear
Front
1st tab
2nd tab
3rd tab
Printed/
copied side
1st tab
2nd tab
3rd tab
3 finished sets