Konica Minolta bizhub PRESS C8000e - Manual (Page 425)

bizhub PRESS C8000/e 10-11
10.1 Utility Menu Screen Outlines 10
[02 Punch Vertical Position Adj.]
[01 2-Hole Punch]
Adjust the vertical position of
punch holes made by the folding
unit. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w/v,
B5 w/v, A5 w/v, 12 e 18 w, 11 e 17 w, 8.5
e 14 w, 8.5 e 11 w/v, 8.125 e 13.25 w, 8.5
e 13 w, 8.25 e 13 w, 8 e 13 w, 8K w, 16K
w/v, 9 e 11 v
Adjustable range:
-40 (Narrow) to +40 (Wide)
(1 step = 0.1 mm)
[02 4-Hole Punch]
Adjust the vertical position of
punch holes made by the folding
unit. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 v, B5
v, 12 e 18 w, 11 e 17 w, 8.5 e 11 v, 8K w,
16K v, 9 e 11 v
Adjustable range:
-40 (Narrow) to +40 (Wide)
(1 step = 0.1 mm)
[03 Multi Folder (Fold) Adj.]
[01 Half-Fold Position Adj.]
Adjust the half-folded position deter-
mined by the folding unit. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
-50 (Short) to +50 (Long)
(1 step = 0.1 mm)
[02 Tri-Fold-in Pos. Adj.]
Adjust the folded positions in Tri-Fold-
in mode determined by the folding unit.
The position of Single Fold is calculat-
ed from the edge of the sheet, while
that of Double Fold is calculated from
the position of Single Fold. Be sure to
start with the Double Fold adjustment,
then proceed to the Single Fold adjust-
ment. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
-50 (Short) to +50 (Long)
(1 step = 0.1 mm)
[03 Tri-Fold-out Pos. Adj.]
Adjust the folded positions in Tri-Fold-
out mode determined by the folding
unit.
The position of Single Fold is calculat-
ed from the edge of the sheet, while
that of Double Fold is calculated from
the position of Single Fold. Be sure to
start with the Single Fold adjustment,
then proceed to the Double Fold ad-
justment. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
-50 (Short) to +50 (Long)
(1 step = 0.1 mm)
[04 Double Parallel Pos. Adj.]
Adjust the folded positions in Double
Parallel mode determined by the fold-
ing unit.
The position of Single Fold is calculat-
ed from the edge of the sheet, while
that of Double Fold is calculated from
the position of Single Fold. Be sure to
start with the Single Fold adjustment,
then proceed to the Double Fold ad-
justment. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
-50 (Long) to +50 (Short)
(1 step = 0.1 mm)
Menu Item/Description Setting options (with default bolded)