Konica Minolta bizhub PRESS C8000e - Manual (Page 150)

5.1 Machine Screen 5
bizhub PRESS C8000/e 5-10
5.1.2 Settings on the Machine Screen
The following keys are available at the bottom of the Machine Screen: [Paper Setting], [Both Sides], [Adjust-
ment], [Controller], and [Curl Adjustment].
The screen shown below is the Machine Screen to be displayed on the machine mounted with Image Con-
troller IC-306.
In addition to the keys mentioned above, the [Sample Setting] key is provided for the machine mounted with
Paper Feeder Unit (with scanner) PF-705, Image Controller IC-601, and Hard Disk Kit HD-514.
23 [Both Sides] Press to adjust the position of images on the front and
back sides of paper loaded in each tray (tray 1 to tray
9) for double-sided prints.
24 [Paper Setting] Pressed to set paper conditions for the main body
trays, paper feeder unit trays, upper tray and lower
tray of the post inserter, and cover tray of Perfect
Binder PB-503.
25 Machine status indicator/left Indicates the [shutoff time] when using Weekly timer
or the status of the controller. The [shutoff time] indi-
cation has priority.
26 Consumable and Scrap Indicators Indicates the current status of toner supply. Also, it
notifies via a red indicator when staples need to be
supplied to the optionally mounted stapler, when the
toner recovery box / hole-punch scrap box is full, or
when water needs to be supplied to the humidifier.
27 Job list Displays the current status of the jobs to be operated
on the machine.
28 Message area Displays messages concerning the current status of
the machine or operation currently required.
No. Name Description