Konica Minolta bizhub PRESS C8000e - Manual (Page 611)

bizhub PRESS C8000/e 12-37
12.8 [Network] Tab 12
12.8.2 TCP/IP Setting - IP Filtering
Click [IP Filtering] on the menu of [Network] tab to display this page.
This page allows you to make the settings for IP filtering.
1
Select [Enable] from the drop-down list of "Permit Access" to give an access permission.
2
Enter the desired range of the address to be permitted into the "Set" text boxes. Up to 5 ranges can be
specified.
Only one IP address, not a range, can also be specified in three ways.
Example: Giving permission to 192.168.11.22 only
192.168.11.22 - 0.0.0.0
0.0.0.0 - 192.168.11.22
192.168.11.22 - 192.168.11.22
3
To deny an address, select [Enable] from the drop-down list of "Deny Access."
4
Enter the desired range of the address to be denied into the "Set" text boxes. Up to 5 ranges can be
specified.
In the same ways as giving permission, only one IP address can also be denied.
5
Click [OK].
Click [Cancel] to cancel the setting and clear the specified information.
6
Click [OK] on the setting complete page.