Konica Minolta bizhub PRESS C8000e User Manual
Page 117
bizhub PRESS C8000/e
3-53
3.4
Using Machine When Power Save LED Lights
3
4
Set the minute for the interrupt use, then press Start on the control panel.
Enter a 2-digit minute (from 0 to 59) using the control panel keypad, then press Start.
[Please enter desired copy time / 3 hour(s) 30 minute(s)]
Machine operation is now available with the message [Ready to print] displayed on the screen, until the
set time is up.
% To specify a 1-digit minute, enter [0] first to make it two digits. However, you cannot specify the time
shorter than 5 minutes. Entering 0 for hour and a number smaller than 5 for minute will set the minute
at 5. Also, a number larger than 60 is unavailable for minute.
5
When the machine operation is finished within the set period of time, hold down Power Save on the
control panel for over a second.
The machine returns to OFF condition.