Konica Minolta bizhub PRESS C8000e - Manual (Page 479)

bizhub PRESS C8000/e 10-65
10.7 [02 Administrator Setting] - [01 System Setting] 10
10.7.7 [03 Weekly Timer Setting] - [05 Password for Non-Business Hours]
This machine can be turned on with a specific password entered after Power Save is pressed on the control
panel, even in off condition according to the Weekly Timer.
This section describes how to set a 4-digit password required to use the machine in non-business hours.
With this password specified and entered after Power Save is pressed on the control panel, the machine
allows you to specify the duration of use as desired.
1
Follow the procedure on page 10-3 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [03 Weekly Timer Setting], and [05 Password for Non-Business Hours] in se-
quence.
3
Use the touch panel keypad or the control panel keypad to enter the desired 4-digit password.
NOTICE
If the password is set to "0000," the machine can be used simply by pressing Power Save on the con-
trol panel during off hours. In this case, you will be asked to enter the duration of use (the time to elapse
before the machine power is turned off again). The factory default setting is 0000.
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Weekly Timer Setting Menu Screen will be
restored.