Konica Minolta bizhub PRESS C8000e - Manual (Page 250)

6.8 Loading Paper 6
bizhub PRESS C8000/e 6-34
5
Turn the bottom plate fixing knob counterclockwise to loosen it,
then slide it to the front side. Turn it clockwise to fix it in that po-
sition.
6
Return the tray to its original position, then withdraw it again after the bottom plate of the tray goes up
completely.
The sound of motor elevating the bottom plate can be heard when the tray is returned in position. After
that automation is completed, again withdraw the tray to find that the bottom plate has been elevated
to the top position.
NOTICE
Be sure not to withdraw the tray till the motor sound stops. Otherwise, the later operation may be af-
fected because the bottom plate is not elevated completely to the top.
7
Fix the position of top edges of side guides.
% Move top edges of the side guides to align them to the pa-
per, then turn the two guide fixing knobs clockwise to fix the
guides.
NOTICE
Avoid making the space between the side guides too wide or
too narrow for the paper to be seated straight.
8
Lower the bottom plate of the tray.
% Turn the bottom plate fixing knob counterclockwise to loos-
en it, then slide it to the rear side. Turn it clockwise to fix it
in that position.
The bottom plate automatically goes down.