Konica Minolta bizhub PRESS C8000e User Manual
Page 562
11.2
[Controller] - [01 Controller NIC Setting Menu]
11
bizhub PRESS C8000/e
11-16
Status Notification/SNMP Trap
Group 1-5
Trans Setting
Enable, Disable
Trans Address
IPv4 Change
0.0.0.0 (0-255)
IPv6 Change
0: 0: 0: 0: 0: 0: 0: 0
Host Name Change
Up to 253 characters combining symbols
and alphanumerics can be used.
Trans Port No.
1-65535 (162)
Trans Community Name
public
Up to 15 characters combining symbols and
alphanumerics can be used.
Trans Items
Service Call, JAM, Replenish Paper Tray,
Toner Supply, PM Call, Staple Cartridge
Supply, Finisher Tray Full, Dispose of Punch
Scrap Box, Dispose of Trim Scrap Box, Glue
Pellet Supply, Exchange Trim Receiver, Ton-
er Recovery Box Full, Dispose of Staple
Scrap Box, Humidifier Tank Supply
Trans Setting
Enable, Disable
Trans IPX Network Address
00: 00: 00: 00
Trans IPX Node Address
00: 00: 00: 00: 00: 00
Trans IPX Community Name
public
Up to 15 characters combining symbols and
alphanumerics can be used.
Trans Items
Service Call, JAM, Replenish Paper Tray,
Toner Supply, PM Call, Staple Cartridge
Supply, Finisher Tray Full, Dispose of Punch
Scrap Box, Dispose of Trim Scrap Box, Glue
Pellet Supply, Exchange Trim Receiver, Ton-
er Recovery Box Full, Dispose of Staple
Scrap Box, Humidifier Tank Supply
PING Confirmation
PING Send Address
IPv4 Change
0.0.0.0 (0-255)
IPv6 Change
0: 0: 0: 0: 0: 0: 0: 0 (1-39 bytes)
Host Name
Up to 253 characters combining symbols
and alphanumerics can be used. *
7
Check Connection
Start
LPD Setting
Enable, Disable
SLP Setting
Enable, Disable
LLTD Setting
Enable, Disable
SSDP Setting
Enable, Disable
For Invalid Certificate
Job Delete, Job Continue
Network Setting Clear
Start
*1:
Select [Auto Setting] to make "DHCP Setting," "BOOTP Setting," "ARP/PING Setting," and
"AUTO IP Setting" available. However, changing the selection from [Auto Setting] to [Direct
Setting] invalidates the settings made for "DHCP Setting" and "BOOTP Setting." Also, chang-
ing from [Direct Setting] to [Auto Setting] validates the settings made for "DHCP Setting,"
"BOOTP Setting," "ARP/PING Setting," and "AUTO IP Setting."
Menu Item/Description
Setting options (with default bolded)