Konica Minolta bizhub PRESS C8000e - Manual (Page 330)

9.2 [01 Machine Adjustment] 9
bizhub PRESS C8000/e 9-12
9.2 [01 Machine Adjustment]
9.2.1 [01 Printer Adjustment] - [01 Restart Timing Adjustment]
Adjust the image position of lead edge in paper feed direction in the printer engine.
Objects of adjustment: Tray 1 to Tray 9, Tray Large Plain Offset, Tray Large Thick Offset, Tray Small Plain
Offset, Tray Small Thick Offset, Large Plain Offset (ADU), Large Thick Offset (ADU), Small Plain Offset (ADU),
Small Thick Offset (ADU)
NOTICE
Make this adjustment after completing [03 FD-Mag. Adjustment].
d
Reference
An identification mark can be printed on sample patterns to identify the sides of paper and used paper tray.
For details, please contact your service representative.
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [01 Machine Adjustment], [01 Printer Adjustment], and [01 Restart Timing Adjustment] in se-
quence.
The Restart Timing Adjustment Screen will be displayed.
3
Press the key of the object to be adjusted.
4
Press [Print Mode].
5
Load A3 w paper into the tray to be adjusted, then select that tray key.
6
Press Start on the control panel. A sample pattern will be output.
7
Measure the resultant restart timing.
Allowance: 20 +/- 0.5 mm
8
If any adjustment is required, press [Exit Print Mode] to return to the Restart Timing Adjustment Screen.