Konica Minolta bizhub PRESS C8000e - Manual (Page 110)

3.2 Turning On/Off the Power 3
bizhub PRESS C8000/e 3-46
3.2 Turning On/Off the Power
This machine has two power switches, namely, main power switch and sub power switch.
3.2.1 Turning On the Power
1
Turn ON the main power switch.
The main power switch is located inside the machine and can
be reached from the left side door.
With the main power switch turned on, the Power LED on the
control panel lights in red.
NOTICE
The main power switch should normally be kept turned on. Be
sure not to turn it off/on in usual operation.
2
Turn ON the sub power switch.
The sub power switch is located on the right side of the main
body.
With the sub power switch turned on, the power LED on the
control panel turns green.
3
The Wake-up Screen and Warm-up Screen will be displayed.
A few seconds after the Wake-up Screen appears on the touch panel, the Machine Screen with warm-
up image will be displayed in succession.
The warm-up takes approx. 7.0 minutes.
OFF ON
OFF ON