24 openapi setting, Openapi setting -52 – Konica Minolta bizhub PRESS C8000e User Manual
Page 626
Advertising
12.8
[Network] Tab
12
bizhub PRESS C8000/e
12-52
12.8.24
OpenAPI Setting
Click [OpenAPI Setting] on the menu of [Network] tab to display this page.
This page allows you to make a setting on the extended application I/F (OpenAPI).
1
Enter the desired port number into the "Port Number" text box.
2
Select [Non-SSL Only], [SSL Only], or [SSL/Non-SSL] from the drop-down list of "Use SSL/TLS" (hid-
den when the SSL certificate is not installed).
3
Enter the port number to "Port No. (SSL/TLS)" text box, which is to be used in the SSL communication
(hidden when the SSL certificate is not installed).
4
Click [OK].
Click [Cancel] to cancel the setting and clear the specified information.
5
Click [OK] on the setting complete page.
Advertising