Konica Minolta bizhub PRESS C8000e - Manual (Page 324)

9.1 Function Overview 9
bizhub PRESS C8000/e 9-6
03 Multi Folder (Fold) Adj.
01 Half-Fold Position Adj.
Adjust the half-folded position determined by the
folding unit. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12 e
18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 8K
w, Custom (380-458 mm), Custom (279-379
mm)
Adjustable range:
-50 (Short) to +50 (Long)
(1 step = 0.1 mm)
02 Tri-Fold-in Pos. Adj.
Adjust the folded positions in Tri-Fold-in mode de-
termined by the folding unit.
The position of Single Fold is calculated from the
edge of the sheet, while that of Double Fold is cal-
culated from the position of Single Fold. Be sure to
start with the Double Fold adjustment, then pro-
ceed to the Single Fold adjustment. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12 e
18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 8K
w, Custom (380-458 mm), Custom (279-379
mm)
Adjustable range:
-50 (Short) to +50 (Long)
(1 step = 0.1 mm)
03 Tri-Fold-out Pos. Adj.
Adjust the folded positions in Tri-Fold-out mode
determined by the folding unit.
The position of Single Fold is calculated from the
edge of the sheet, while that of Double Fold is cal-
culated from the position of Single Fold. Be sure to
start with the Single Fold adjustment, then proceed
to the Double Fold adjustment. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12 e
18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 8K
w, Custom (380-458 mm), Custom (279-379
mm)
Adjustable range:
-50 (Short) to +50 (Long)
(1 step = 0.1 mm)
04 Double Parallel Pos. Adj.
Adjust the folded positions in Double Parallel mode
determined by the folding unit.
The position of Single Fold is calculated from the
edge of the sheet, while that of Double Fold is cal-
culated from the position of Single Fold. Be sure to
start with the Single Fold adjustment, then proceed
to the Double Fold adjustment. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12 e
18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 8K
w, Custom (380-458 mm), Custom (279-379
mm)
Adjustable range:
-50 (Long) to +50 (Short)
(1 step = 0.1 mm)
05 Z-Fold Position Adj.
Adjust the folded positions in Z-Fold mode deter-
mined by the folding unit.
The position of Single Fold is calculated from the
edge of the sheet, while that of Double Fold is cal-
culated from the position of Single Fold. Be sure to
start with the Single Fold adjustment, then proceed
to the Double Fold adjustment. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12 e
18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 8K
w, Custom (380-458 mm), Custom (279-379
mm)
Adjustable range:
-50 (Long) to +50 (Short)
(1 step = 0.1 mm)
06 Gate Position Adj.
Adjust the folded positions in Gate mode deter-
mined by the folding unit.
The position of Single Fold is calculated from the
edge of the sheet, while that of Double Fold is cal-
culated from the position of Single Fold and that of
Triple Fold from that of Double Fold. Be sure to
start with the Single Fold adjustment. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12 e
18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 8K
w, Custom (380-458 mm), Custom (279-379
mm)
Adjustable range:
Single Fold/Triple Fold: -50 (Long) to +50
(Short)
(1 step = 0.1 mm)
Double Fold: -50 (Short) to +50 (Long) (1
step = 0.1 mm)
Menu Item/Description Objects/Range