Konica Minolta bizhub PRESS C8000e - Manual (Page 325)

bizhub PRESS C8000/e 9-7
9.1 Function Overview 9
03 Finisher Adjustment (Large Capacity Stacker LS-505)
05 Stacker Adjustment
01 Paper Width Adjustment
Adjust the position of adjustment plates if output
sheets show misalignment in crosswise direction
on the stacker tray. Objects of adjustment:
Stacker No. 1, Stacker No. 2
Adjustable range:
-20 (Narrow) to +20 (Wide)
(1 step = 0.1 mm)
02 Paper Length Adjustment
Adjust the position of the front stopper if output
sheets show misalignment in paper feed direction
on the stacker tray. Objects of adjustment:
Stacker No. 1, Stacker No. 2
Adjustable range:
-20 (Opposite direction) to +20 (Paper feed
direction)
(1 step = 0.1 mm)
03 Finisher Adjustment (Saddle Stitcher SD-506)
06 Saddle Stitcher Pos. Adj.
01 Staple Center Position
Adjust the center position of staples determined by
the saddle stitcher.
Prerequisite: Paper Width Adjustment (Staple) is
completed. Adjustable range:
-20 (Leftward) to +20 (Rightward)
(1 step = 0.1 mm)
02 Staple Paper Width Adj.
Adjust the width of adjustment plates of the saddle
stitcher to be used in Staple mode. Objects of adjustment:
Full Area, SRA3 w, A3 w, B4 w, SRA4 w, A4
w, B5 w, 13 e 19 w, 12 e 18 w, 11 e 17 w,
8.5 e 14 w, 8.5 e 11 w, 8.125 e 13.25 w, 8.5
e 13 w, 8.25 e 13 w, 8 e 13 w, 8K w, 16K
w, Custom (380-463 mm), Custom (257-379
mm)
Adjustable range: -20 (Narrow) to +20 (Wide)
(1 step = 0.1 mm)
03 Staple Pitch Adjustment
Adjust the staple pitch determined by the saddle
stitcher. Objects of adjustment:
Full Area, SRA3 w, A3 w, B4 w, SRA4 w, A4
w, B5 w, 13 e 19 w, 12 e 18 w, 11 e 17 w,
8.5 e 14 w, 8.5 e 11 w, 8.125 e 13.25 w, 8.5
e 13 w, 8.25 e 13 w, 8 e 13 w, 8K w, 16K
w, Custom (380-463 mm), Custom (257-379
mm)
Adjustable range:
-20 (Narrow) to +20 (Wide)
(1 step = 0.1 mm)
04 Half-Fold Position Adj.
Adjust the half-folded position determined by the
saddle stitcher. Objects of adjustment:
Full Area, SRA3 w, A3 w, B4 w, SRA4 w, A4
w, B5 w, 13 e 19 w, 12 e 18 w, 11 e 17 w,
8.5 e 14 w, 8.5 e 11 w, 8.125 e 13.25 w, 8.5
e 13 w, 8.25 e 13 w, 8 e 13 w, 8K w, 16K
w, Custom (380-463 mm), Custom (257-379
mm)
Adjustable range (top of output sheet):
-50 (Short) to +50 (Long)
(1 step = 0.1 mm)
05 Tri-Fold Position Adj.
Adjust the folded positions in Tri-Fold-in mode de-
termined by the saddle stitcher.
The position of Single Fold is calculated from the
edge of the sheet, while that of Double Fold is cal-
culated from the position of Single Fold. Be sure to
start with the Double Fold adjustment, then pro-
ceed to the Single Fold adjustment. Objects of adjustment:
Full Area, A4 w, 8.5 e 11 w
Adjustable range:
Single Fold: -100 (Short) to +100 (Long)
(1 step = 0.1 mm)
Double Fold: -100 (Long) to +100 (Short)
(1 step = 0.1 mm)
Menu Item/Description Objects/Range