Konica Minolta bizhub PRESS C8000e - Manual (Page 326)

9.1 Function Overview 9
bizhub PRESS C8000/e 9-8
06 Fold Paper Width Adj.
Adjust the width of adjustment plates if half-folded
or tri-folded sheets show misalignment. Objects of adjustment:
Full Area, SRA3 w, A3 w, B4 w, SRA4 w, A4
w, B5 w, 13 e 19 w, 12 e 18 w, 11 e 17 w,
8.5 e 14 w, 8.5 e 11 w, 8.125 e 13.25 w, 8.5
e 13 w, 8.25 e 13 w, 8 e 13 w, 8K w, 16K
w, PI, Custom (380-463 mm), Custom (257-
379 mm)
Adjustable range:
-50 (Narrow) to +50 (Wide)
(1 step = 0.1 mm)
07 Trimming Adjustment
Adjust the trimming width. The trimming width
should be more than 2.0 mm, otherwise the trim-
ming operation may not performed properly. Objects of adjustment:
Full Area, SRA3 w, A3 w, B4 w, SRA4 w, A4
w, B5 w, 13 e 19 w, 12 e 18 w, 11 e 17 w,
8.5 e 14 w, 8.5 e 11 w, 8.125 e 13.25 w, 8.5
e 13 w, 8.25 e 13 w, 8 e 13 w, 8K w, 16K
w, Custom (380-463 mm), Custom (257-379
mm)
Adjustable range:
-400 (Short) to +400 (Long)
(1 step = 0.1 mm)
08 Trimmer Receiver Adjustment
Frequent trimming operations may cause damage
to the receiver, resulting in trimming failures. Move
the receiver automatically or manually. Objects of adjustment:
Trim Count, Move Pitch
03 Finisher Adjustment (Perfect Binder PB-503)
07 Perfect Binder Adjustment
01 Cover Trimming Adjustment
Adjust the trimming width on the lead edge of the
right cover page. To align the lead edges of left and
right cover pages, be sure to perform Cover Lead
Edge Adjustment in advance. Objects of adjustment:
Perfect Binder Tray, Except PB Tray
Adjustable range:
-128 (Short) to +127 (Long)
(1 step = 0.1 mm)
02 Cover Lead Edge Adj.
Adjust the lead edge position of left cover page de-
termined with reference to the body set. The sizes
referred to in this section are those of body sets
corresponding to cover sizes. Objects of adjustment:
PB Tray: Full Area, A4 v, B5 v, A5 w/v, 8.5
e 11 v, 5.5 e 8.5 w, 16K v, Custom (220-379
mm), Custom (148-219 mm)
Except PB Tray: Full Area, A4 v, B5 v, A5
w/v, 8.5 e 11 v, 5.5 e 8.5 w, 16K v, Custom
(220-379 mm), Custom (148-219 mm)
Adjustable range:
-128 (Short) to +127 (Long)
(1 step = 0.1 mm)
03 Spine Corner Forming Pos.
Adjust the state of spine corners formed in cover
sheets. Objects of adjustment:
Up/Down Forward Adj. (Front), Up/Down
Rear Adj. (Rear)
Adjustable range:
-128 (Down: circle) to +127 (Up: square)
(1 step = 0.1 mm)
04 Glue Start Position
Adjust the position to start gluing on the body set.
The sizes referred to in this section are those of
body sets corresponding to cover sizes. Objects of adjustment:
Ahead (rear): Full Area, A4 v, B5 v, A5 w/v,
8.5 e 11 v, 5.5 e 8.5 w, 16K v, Custom (220-
379 mm), Custom (148-219 mm)
Back (front): Full Area, A4 v, B5 v, A5 w/v,
8.5 e 11 v, 5.5 e 8.5 w, 16K v, Custom (220-
379 mm), Custom (148-219 mm)
Adjustable range:
-128 (Soon) to +127 (Late)
(1 step = 0.1 mm)
Menu Item/Description Objects/Range